You are here: Home > Heated Lye Soap Fillers
EZ-S Gravity Soap Filling System: Heated Filling For Lye Soaps!
The EZ-S Gravity Candle Pouring System uses gravity and positive displacement (pressure from the weight of soap in your melter) to fill containers with cold processed lye soaps.

No Soap is too Thick: if it can pour from a melter then gravity can move it through this digitally controlled, heated, PTFE hose.

Can also transfer heated soaps from large melters to smaller melters & containers.
Safe for Lye! All stainess steel and PTFE Hose work with Lye.

Imagine not having to lift heavy melters, containers or lifting pouring pitchers again. You would never have to walk from table to table with potentially dangerous heavy containers of heated materials, worrying about accidents, spills and clean up.

The EZ-S is The Heated Filling For Lye Soaps!
SoapMelters is the company handcrafted soap makers trust for their soap melting and heated filling equipment purchases- Here is why the EZ-S Gravity Filling System is right for your soap making needs:
Make More Soaps & Save Time: Instead of walking around with pouring pitchers, you bring the "portable heated ball valve" right to your containers.
Save Money: Fill more soap molds and containers in less time with less employees and waste while using your existing melting tanks.
One Person Operation:
Gives you control and our systems that are never late, never make mistakes and never call in sick.
Soap are "Handcrafted": All systems use hand-held wands so it is just like pouring your candles with a "magical" pouring pitcher.
Quality Control: Our candle pouring systems are proven winners that never make mistakes and perform when you need them most.
Superior Fast, Even Heating: Heating element heats evenly and fast with its dielectric strength of over 2000 volts with internal stainless steel overbraid.
Superior Hose Interior:
Smooth Bore PTFE heated hose is protected with stainless steel overbraid and is 50% thicker than any competitors to provide faster flow with chemical, contamination and deterioration resistant.

Digital Temperature Controller: For precise heating from 0° to 212° F/ 100 ° C.
Just pour your soap through the system to clean.

Reliable, Long-Lasting, Battle-Tested: Handcrafted Soap Makers buy their Soap Melting and Heated Filling Equipment from SoapMelters because our Soap Equipment helps handcrafted soap makers save time and money while increasing production in the most challenging and demanding situations. Our systems perform when you need them most.
Sort By:
Page of 1  
EZ-S 800 Gravity Soap Filling System
EZ-S 800 Gravity Soap Filling System
List Price: $1,225.00
Our Price: $1,095.00
Sale Price: $895.00
You Save $330.00!

8' Heated System Uses Gravity To Fill Soap Molds

Safe for Lye!
   
 
 YOU OWE IT TO YOURSELF & YOUR BUSINESS TO CHANGE FOR THE BETTER...
IMAGINE a cost effective, worry free way to pour candle waxes in less time with less waste and with less back, shoulder, neck and hand aches and pains. If you have employees, then you know labor costs are very high so being able to increase your production reduces the time and money spent on employee training, retaining and most of all, employees walking to and from the pouring table with full pouring pitchers. This old fashion way is expensive. 
 
Customers all over the world are using our wax dispensing systems and have increased their production and reduced waste dramatically, some as much as by 50% more production and 75% less waste.
 
SO ARE YOU READY TO SUPER-CHARGE YOUR PRODUCTION?
ORDER TODAY TO MAXIMIZE YOUR TIME AND EFFORT WITH MORE PRODUCTION!
 

IS THE SYSTEM SAFE?  HOW LONG DOES IT LAST?

  • Our hoses are rated for continuous exposure temperatures of 250° F (121°C), but since our digital controllers limit temperature to a maximum of 212° F (100°C),  degrees you have even extra protection and extended  life.
  • Hoses are wired with parallel circuit, low watt density electric heating with a conductive polymer core  that with our sensors regulate heat output to prevent overheating, hot spots or causing burn outs in response to changes in surface and ambient temperatures. 
  • All hoses have a dielectric strength over 2000 volts and have internal stainless steel overbraid for additional mechanical protection and a low resistance path to ground as required by NEC 427-23.

WHAT IS SO SPECIAL ABOUT YOUR PTFE HOSES?

Unique hand assembly makes sure that your hose is working at the optimal level.  Each hose is flexible, heated with the finest quality, efficient heating source and of course the welded, PTFE Core makes our hoses are:
  • Chemical Resistant: Inert to practically all commercial chemicals, acids, alcohols, coolants, elastomers, hydrocarbons, solvents, synthetic compounds and hydraulic fluids.
  • Temperature Resistant: Rated for 406 degrees F with low volumetric expansion characteristics, so it is easy to clean, sterilize and with not retain particles, colors or scents.
  • Shock Resistant: Not affected by continuous flexing,vibration, impulse pressure or alternating hot and cold cycling.
  • More Flexible & Lightweight than Rubber: Easier to move, handle and install than rubber hose!
  • High Flow Rates: Flow coefficient of friction of TeflonŽ and anti-stick properties lowers pressure drop while maintaining good service pressures.
  • Non-Contaminating: Will not contaminate material, fluid or gas conducted - TeflonŽ is an FDA recognized material for food handling and pharmaceutical applications.
  • Non-Adhesive: Easy handles substances like adhesives, asphalt, dyes, greases, glue, latex, lacquers and paints.
  • Moisture Resistant: No moisture absorption, ideal as a pigtail in bulk gas handling and pneumatic systems where a low dew point is critical.
  • Long Lasting: Impervious to extended use, climate, and can be stored for extended periods of time without aging.

 ARE PEOPLE USING THIS SYSTEM? ISN'T IT EASIER TO STICK WITH WHAT I KNOW?
We are all for traditional, natural ways of doing things, but imagine what your reaction would be if you went to the register at a supermarket with a cart full of groceries and the cashier took out a pencil and paper to check you out? If you are still hand pouring your soaps, it is like you mowing your lawn with a push reel mower. Best of all, with our wax dispensing systems, your candles are still "handmade" by you and your company.

 
A SIMPLE TEST TO SEE IF YOU ARE MAXIMIZING YOUR BUSINESS PRODUCTION:
WHICH EQUIPMENT WOULD YOU BUY IF YOU HAD A LAWN MOWING BUSINESS?

push reel mower

OR

mower Rider Mower
WHICH EQUIPMENT WOULD YOU BUY IF YOU HAD A CLOTHING BUSINESS?

sewing needle

OR

sewing machine

WHICH EQUIPMENT WOULD YOU BUY IF YOU HAD AN ICE CREAM BUSINESS?
old fashioned ice cream maker OR professional ice cream maker
 
WHICH EQUIPMENT ARE YOU USING FOR YOUR BUSINESS?
soap wax melting kit
OR
direct heat melters
pouring pot 
OR
  EZ S Gravity Soap Gilling System
 
YOU OWE IT TO YOURSELF & YOUR BUSINESS TO CHANGE FOR THE BETTER...
IMAGINE a cost effective, worry free way of being able to make 2X as many soaps in less time with less waste and with less back, shoulder, neck and hand aches and pains. If you have employees, then you know labor costs are very high so being able to increase your production reduces the time and money spent on employee training, retaining and most of all, employees walking to and from the pouring table with full pouring pitchers. This old fashion way is expensive. 
 
 
SO ARE YOU READY TO SUPER-CHARGE YOUR PRODUCTION?
ORDER TODAY TO MAXIMIZE YOUR TIME AND EFFORT WITH MORE PRODUCTION!