 |
 |
 |
|
- The Semi-Automated High Viscosity Melting & Dispensing Combo
- Choose The Soap Melter Size You Need For Your Largest Batch
- Choose the Soap Dispenser You Need To Fill
- Stainless Steel fittings
Technical Specifications Will Vary Depending on Soap Melting Tank and Soap Filling System
- Melting Tank: Available in various sizes. Standard System is PRIMO25.
- Dimensions of Primo25: Inner Diameter = W 18" (46cm) X H 24" (61cm) Outer Diameter= W 20" (51cm) X L 20" (51 cm) X H 26" (66cm) Stainless Steel interior. Digital temperature controller is easy to read and use and features a Liquid Crystal Display (LCD) to provide accurate, precise heating from -0° to 212° F/ 100 ° C, light-emitting diode (LED) to indicate On/Off status, easy fingertip-touchpad which has lockable feature and allows easy set up and adjustment of control setpoint, differential, and other functions, and is enclosed in high-impact resistant, thermoplastic NEMA 1X corrosion-resistant surface-mount enclosure. Also features single-stage, electronic temperature control with a Single-Pole, Double-Throw (SPDT) output relay and lockable front-panel touchpad for setup and adjustment, wide temperature differential adjustment range (1 to 30° F) to allow the user to set a precise (1° F) temperature differential from 1 to 30F°, adjustable anti-short cycle delay (0 to 12 Minutes in 1-Minute Increments) ensures that the output relay remains off for a user-set time delay, which helps avoid hard starts, nuisance overload outages, and unnecessary equipment wear. Waxes Never touch Heating Element
- 810W
- 8amps at 120v; 4amps at 240v
- 120v or 240v
- Wax Filling System: Available in all sizes for wax dispensing and wax filling of containers.
- Specially Designed Fully Heated, Ergonomic, Anti-fatigue Lightweight Thermo Gun™
- Enclosure: Features high impact, yet lightweight, heat resistant plastic.
- Fully heated, stainless steel and brass fittings with Buna-N and Teflon seals.
- Easily controllable pours with ergonomic handle and safety lock.
- Control Box/Pump
- Enclosure: High-impact and corrosion resistant 304 grade stainless steel construction which is heat, impact, chemical, and moisture resistant. Built in reset breaker/fuse, safety features and self-regulating heating ensure safety and long use.
- Digital Temperature Controller: Easy to read and use 4-digit 7-Segment LED to provide accurate, precise heating from -0° to 212° F/ 100 ° C, with On/Off status, easy fingertip-touch pad which has lockable feature and allows easy set up and adjustment of control set-point, differential, and other functions.
- Thermo Pump & Motor: Industrial 1/3HP motor with bronze iron pump with heated, insulated steel casing and rated for continuous use.
- Thermo Hose: Stainless Steel Braided Teflon® hose tubing is light, flexible and durable for safe, even heat transfer, faster transfer speeds and longer term use without contamination or wear. Super energy efficient and rated for a maximum digitally controlled temperature of 400° F (204°C), but with a limiter setting to keep it at a maximum of 212° F (100°C) degrees so there is extra insulation, protection and extended life.
- Electrical Specifications of Filling System:
- 600W
- 5amps at 120v; 3amps at 240v
- 120v or 240v (with Adapter Option)
- Heavy Duty, Industrial Steel Cart: with 600-Lb. Capacity: 40” (102cm) long x 24” (61cm) wide x 6” (15cm) high (30” (76cm) at the front bar only)
- ELECTRICAL: 120v/240v available. Standard Unit is 1400W (12Amp at 120v/7Amp at 240v)-Specifics depend on the Melting Tank and Filling System Combination.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Order Your Semi-Automated High Viscosity Soap Melter & Soap Dispenser Together
- Precisely Measured, Identical & Even Pouring for your containers.
- Primo Soap Melters are the Industry's Fastest, Even Heating, Energy Efficient, Digital Modified Direct Heat Melter and is Round on Inside-Square on Outside for Faster Heating & Cleaning.
- Simple, one person operation increases production while reducing mistakes and improving quality and uniformity.
- Fully heated and digitally controlled to keeps your materials at the perfect temperature for your filling needs while dispensing.
- Sleek, ergonomic profile, yet industrial for commercial 24/7 production schedules.
- Cleaning is a cinch since unit almost automatically cleans itself with the proprietary combination of internal components designed to withstand dyes and fragrances and being fully heated.
|
|
|
|
|
|
|
Celebrating Over 25 Years
ONLINE! 
