 |
 |
 |
|
SoapMelters Is The Industry Leader For Innovative Soap Making Equipment2-3X+ FASTER MELTING USING 50% LESS ELECTRICITY- Save Time, Energy, & Money With The Soap Heating, Melting & Pouring Combo on Wheels With "Just Set It... Forget It" Innovative Automated Technology -> No Triggers or Buttons To Press!
- World's Fastest, Even Heating, Energy Efficient, Digitally Controlled Industrial Heating & Melting Tanks
- Simple, ONE Person Operation
- Ideal for Fast Melting & Precise, Fast, Controlled, Heated Fully Automated Filling of Most Soap Bases and Oils with No Drips or Bubbles!
- All Stainless Steel Fittings
- Choose The Soap Melter Size Needed Per Your Largest Batch
- Choose Your Hose Length
- Choose Your Soap Dispenser Fill Size:
- 1/8oz to 20oz -> AS3000
- 4oz to 45oz, or -> AS4500
- 12oz to 90oz -> AS9000
- Fantastic Stainless-Steel Cart Included
Technical Specifications Will Vary Depending on Soap Melting Tank and Soap Filling System
- Wax Melting Tank: Available in various sizes. Standard System is PRIMO 25 Gallon Soap Melter.
- Dimensions of Primo 25: Inner Diameter = W 18" (46cm) X H 24" (61cm) Outer Diameter= W 20" (51cm) X L 20" (51 cm) X H 26" (66cm) Stainless Steel interior. Digital temperature controller is easy to read and use and features a Liquid Crystal Display (LCD) to provide accurate, precise heating from -0° to 212° F/ 100 ° C, light-emitting diode (LED) to indicate On/Off status, easy fingertip-touchpad which has lockable feature and allows easy set up and adjustment of control setpoint, differential, and other functions, and is enclosed in high-impact resistant, thermoplastic NEMA 1X corrosion-resistant surface-mount enclosure. Also features single-stage, electronic temperature control with a Single-Pole, Double-Throw (SPDT) output relay and lockable front-panel touchpad for setup and adjustment, wide temperature differential adjustment range (1 to 30° F) to allow the user to set a precise (1° F) temperature differential from 1 to 30F°, adjustable anti-short cycle delay (0 to 12 Minutes in 1-Minute Increments) ensures that the output relay remains off for a user-set time delay, which helps avoid hard starts, nuisance overload outages, and unnecessary equipment wear. Waxes Never touch Heating Element
- 810W
- 8amps at 120v; 4amps at 240v
- 120v or 240v
- Wax Filling System: Available in all sizes for wax dispensing and wax filling of containers.
- Fully Heated AutoShot Head
- Enclosure: Features 304 grade stainless steel head which is heat, impact, chemical, and moisture resistant, while offering structural stability.
- Digital Controller: Advanced microchip technology with multiple color display, easily adjustable keys and 4 different functions, including switch-on impulse and cycling settings for ON and OFF cycles. Features a NEMA4X (IP66 equivalent) is sealed against the ingress dust, water and foreign materials. Also features a low profile fascia so less prominent keys in the front of the panel and so less likely to become dirty.
- Valve: Stainless steel UL-Listed heated valve is NEMA 4 Protection Class (rated for outdoor use) with 1/4" valve with Viton® seals insure extended life.
- Control Box/Pump
- Enclosure: High-impact and corrosion resistant 304 grade stainless steel construction which is heat, impact, chemical, and moisture resistant. Built in reset breaker/fuse, safety features and self-regulating heating ensure safety and long use.
- Digital Temperature Controller: Easy to read and use 4-digit 7-Segment LED to provide accurate, precise heating from -0° to 212° F/ 100 ° C, with On/Off status, easy fingertip-touch pad which has lockable feature and allows easy set up and adjustment of control set-point, differential, and other functions.
- Thermo Pump & Motor: Stainless Steel with heated, insulated stainless steel casing, self-regulating and is rated for continuous use.
- Thermo Hose: Stainless Steel Braided Teflon® hose tubing is light, flexible and durable for safe, even heat transfer, faster transfer speeds and longer term use without contamination or wear. Super energy efficient and rated for a maximum digitally controlled temperature of 400° F (204°C), but with a limiter setting to keep it at a maximum of 212° F (100°C) degrees so there is extra insulation, protection and extended life.
- Electrical Specifications of Filling System:
- 450W
- 4amps at 120v; 2amps at 240v
- 120v or 240v (with Adapter Option)
- Heavy Duty, Industrial Steel Cart: with 600-Lb. Capacity: 40” (102cm) long x 24” (61cm) wide x 6” (15cm) high (30” (76cm) at the front bar only)
- Boom: 80" High, 1" Rounded Stainless Steel Tubing that Slides Directly into Cart.
- Swivel: 32" Long (some models have 60" long), 1" Rounded Stainless Steel Tubing with 360° turning radius and sliding hose balancer positioner for increased flexibility.
- Hose Balancer: Special 8' long, lightweight STEEL cable with stainless steel spring edge in heavy duty aluminum housing maximizes safety, flexibility and long product life even in the most industrial environments. Waxmelters' compact hose balancer (2.9” / 7.3cm) saves room, is easy to grasp and makes it easy for you to make precise tension adjustments.
- ELECTRICAL: 120v/240v available. Standard Unit is 1300W (12Amp at 120v/6Amp at 240v)-Specifics depend on the Melting Tank and Filling System Combination.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Save Time, Energy, & Money -> Order Your Wax Melter & Automated Dispensing System Together With Fantastic Industrial Stainless Steel Cart
- Fully AUTOMATED, Precisely Measured, Identical, EVEN Pouring for your Containers with NO Drips or Bubbles!
- PRIMO Heating & Melting Tanks Utilize Revolutionary, Innovative Technology To Save You TIME, ENERGY, and MONEY!
- 2-3X+ FASTER MELTING USING 50% LESS ELECTRICITY
- World's Fastest, Even Heating, Energy Efficient, Digitally Controlled Industrial Melting Tanks
- SoapMelters Is The Industry Leader For Innovative Melting & Filling Systems
- All Stainless Steel Fittings
- Ideal For Most Soap Bases and Oils
- Simple, ONE person operation increases production while reducing mistakes and improving quality and uniformity
- Heated, flexible Stainless Steel braided Teflon cored hose provides plenty of range and mobility for filling. Nothing "sticks" so No Cross Contamination!
- You Choose -> Your Soap Melter Size, Hose Length, and Soap Dispenser Fill Size
- Fully heated and digitally controlled to keeps your materials at the perfect temperature for your filling needs while dispensing
- Sleek, ergonomic profile, and MOBILE made for industrial and commercial 24/7 production schedules
- Cleaning is EASY since unit almost automatically cleans itself with the proprietary combination of internal components designed to withstand dyes and fragrances and being fully heated
- With PX2000, you can always UPGRADE your melter size in the future so your unit can GROW with your business!
|
|
|
|
|
|
|
Celebrating Over 25 Years
ONLINE! 
